Up to 30 Inches Per Pull
Dispense up to 30 inches with one handle stroke. Make additional pulls for longer strips.
Manual water-activated tape dispenser
Phoenix M2 Manual Gummed Tape Dispenser with Top Heater
The Phoenix M2 is a hand-operated water-activated tape dispenser with a super wide moistening brushes and a built-in top heater for carton-sealing applications.
Pull the handle to dispense up to 30 inches of tape in one stroke, or make multiple pulls for longer strips. The M2 accepts tape widths from 1½ to 3 inches. Its top heater requires electrical power.
Phoenix M2 manual with heater.
Machine features
Manual Dispensing with Heated Moistening
The M2 combines hand-operated tape dispensing with a super wide brush moistening system and top heater.
Widest Manual Brush Moistening
Phoenix uses the same wide brush found in their electrics to help wet the water-activated adhesive as tape passes through the machine.
Top Heater
The built-in top heater supports activation of the tape adhesive during dispensing.
1½- to 3-Inch Tape Widths
Accepts water-activated tape in common carton-sealing widths.
Steel Construction
Steel housing with a baked-enamel finish designed for packaging work areas.
Utility Top
Provides a convenient place for markers, hand stamps and other packing tools.
M1 vs. M2
What Makes the Phoenix M2 Different?
Both manual Phoenix models dispense up to 30 inches of tape per pull and accommodate 1½- to 3-inch tape. The M2 adds a wide brush moistening system and top heater.
The dispensing action remains manual. The top heater requires electrical power, so the M2 can be used with or without electricity. For a manual dispenser without a built-in top heater, see the Phoenix M1.
Phoenix M2 at a Glance
- Hand-operated tape dispensing
- Up to 30 inches per pull
- Longer strips with multiple pulls
- 1½- to 3-inch tape widths
- Super wide moistening brush
- Built-in top heater
Technical details
Phoenix M2 Specifications
Specifications below are supported by the manufacturer's M2 product listing. Electrical rating and dimensions are omitted until confirmed.
| Dispensing Operation | Manual handle |
|---|---|
| Tape Width | 1½ to 3 inches |
| Dispensing Length | Up to 30 inches per pull; multiple pulls for longer lengths |
| Moistening System | Super wide brush |
| Top Heater | Included, 115v |
| Construction | Steel with baked-enamel finish |
Machine operates just like the M1 when the heater is not plugged in. Heat assists in colder environments.
Documentation and service
Phoenix M2 Manuals, Parts & Maintenance
Find manufacturer-issued instructions, M-Series parts information and maintenance videos.
M1/M2 Illustrated Parts Manual
Explore interactive diagrams and identify replacement parts by machine area.
View illustrated M1 parts →M1/M2 Setup Video
Find the manufacturer's Phoenix M1 unpacking and setup video.
View videos →Repair & Maintenance
Review maintenance videos covering manual-machine springs, brushes and cutters.
View repair resources →Questions About the Phoenix M2?
Contact Pro Pack Solutions for machine selection, parts inquiries and availability.